offset fsuipc et bouton ??

FSUIPC / Emulateurs de claviers & souris / IOCP, etc...

Re: offset fsuipc et bouton ??

Messagede JeeHell » Lun 22 Aoû 2011 00:17

Si je trouve le temps, je fais des tests demain avec les offsets en question.

@+
JL
JeeHell
 
Messages: 1850
Inscription: 18/05/09

Re: offset fsuipc et bouton ??

Messagede bebert » Lun 22 Aoû 2011 15:45

merci jeehell merci affiche
Image
Avatar de l’utilisateur
bebert
 
Messages: 347
Inscription: 8/10/09

Re: offset fsuipc et bouton ??

Messagede JeeHell » Lun 22 Aoû 2011 18:15

Bon alors, chez moi, l'offset 3122 fonctionne correctement.
Par contre, les fonctions FSUIPC setbits/clrbits elles ne fonctionnent pas comme prévu. SI je mets 4 en paramêtre, il m'active/désactive les sons ID markers et pas les sons ID NAV1 ??

Sinon essaye les offsets 3105,3106 et 3107, cela revient au même mais en plus "facile". Au lieu de byte setbits/clrbits tu byte set, et en paramêtre tu mets 1 (ON) ou 0 (OFF).

@+

JL
JeeHell
 
Messages: 1850
Inscription: 18/05/09

Re: offset fsuipc et bouton ??

Messagede bebert » Mar 23 Aoû 2011 09:00

oui pour moi aussi l'offset 3122 marche bien , ..... gratgrat
Image
Avatar de l’utilisateur
bebert
 
Messages: 347
Inscription: 8/10/09

Re: offset fsuipc et bouton ??

Messagede algue14 » Mar 23 Aoû 2011 18:47

bebert a écrit:alors non, j'utilise une bu8036x ..

et en test une pokey


Et donc ?

Avec la bu8036x ça donne quoi si tu parametre FSUIPC dans buttons and switchs ?
A+

Alain
Avatar de l’utilisateur
algue14
 
Messages: 1626
Inscription: 20/04/09
Localisation: Caen ; Normandie

Re: offset fsuipc et bouton ??

Messagede bebert » Mar 23 Aoû 2011 20:43

pour ma part je ne travail qu'avec pokey car il a plus d'entree cligneoeil
Image
Avatar de l’utilisateur
bebert
 
Messages: 347
Inscription: 8/10/09

Re: offset fsuipc et bouton ??

Messagede algue14 » Sam 27 Aoû 2011 19:11

Dis Bebert
Ta pokey c'est laquelle ?
55 usb ou 55e ethernet ?
A+

Alain
Avatar de l’utilisateur
algue14
 
Messages: 1626
Inscription: 20/04/09
Localisation: Caen ; Normandie

Re: offset fsuipc et bouton ??

Messagede bebert » Dim 28 Aoû 2011 16:03

l'USB 55
Image
Avatar de l’utilisateur
bebert
 
Messages: 347
Inscription: 8/10/09

Re: offset fsuipc et bouton ??

Messagede algue14 » Dim 28 Aoû 2011 16:29

bebert a écrit:l'USB 55


Ben alors tu peux l'utiliser comme un joystick

extrait de la doc que tu as surement lue

Joystick mapping – only for USB devices
Joystick axis and buttons mapping can be setup via Joystick mapping dialog. Got to ‘Peripherals’ and select ‘Joystick settings…’. The dialog on Figure 5 appears.

Each axis can be assigned a analog input. In addition, analog to digital mapping option can be enabled. This allows user to connect an analog joystick to a PoKeys devices and simulate key presses for each direction of the joystick. To do so, first check ‘Map to key’ option. Then set the dead band (when input value will be between lower and upper dead band margins, no keys will be activated) using sliders. In the lower part of the window, select the mapping options.

For simple direct mapping (pin input status is directly reflected in joystick button status) use the ‘Direct mapping’ option and select pin number to be associated with selected joystick button. If more advanced behavior is needed (joystick button is pressed for a short time only on transitions of pin status), user should select ‘Triggered mapping’ option to select one pin that triggers selected joystick button on off-to-on transition (Down Event) and one pin that triggers this joystick button on on-to-off transition (Up Event).
If joystick button mapping is to be used in connection with encoder inputs, use ‘Triggered mapping’ option (encoder’s values cannot be directly translated into direct mapping) and select a pin with the appropriate encoder channel. For example: pins 5 and 6 are set up as digital inputs with encoder (channel A on pin 5 and channel B on pin 6). When pin 5 is selected as Down event pin for joystick Button 2 and pin 6 is selected as Down event pin for joystick Button 3, rotating the encoder in positive direction will trigger joystick Button 2 on each detent. Similarly, rotating the encoder in negative direction, joystick Button 3 will be triggered on each detent. Up Event pin option cannot be used in connection with encoders.
Figure 5: Joystick mapping settings


C'est à la page 19

ça peut être très pratique pour contourner un problème en rapport avec les combinaisons de touche, comme tu semble rencontrer
A+
Alain
A+

Alain
Avatar de l’utilisateur
algue14
 
Messages: 1626
Inscription: 20/04/09
Localisation: Caen ; Normandie

Re: offset fsuipc et bouton ??

Messagede bebert » Dim 28 Aoû 2011 16:49

oui , mais la configue joy est un peripherique de la carte et non reconnue comme tel
Image
Avatar de l’utilisateur
bebert
 
Messages: 347
Inscription: 8/10/09

PrécédenteSuivante

Retourner vers Liaisons entreFS et les autres logiciels





Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 1 invité