Presentation BAT21

Améliorons ici, nos échanges avec : hobbies,
situation géographique, etc...

Presentation BAT21

Messagede Bat21 » Lun 3 Fév 2014 13:29

Hello, I am an Hardware engineer with fifteen years of experience in a Flight Test Centre, Air base 217.
I'm very interesting for a little and simple installation (basic and safety indicators) for my twin children who are five years old. But also I would like to access to the roll and pitch movements. For my study I made a little F117 demonstrator witch it had them. I am a beginner with Fsxxx interface so I need your help but I also can help you for informatics scripts and electronic design.
Thanks you for a help. images/smilies/icon_laugh.gif
Avatar de l’utilisateur
Bat21
 
Messages: 3
Inscription: 30/01/14
Localisation: near Geneva, Franco-Suisse

Re: Presentation BAT21

Messagede Jackpilot » Lun 3 Fév 2014 16:20

Welcome aboard

You will find here some very clever designs on the subject. Not my bag though, but some other members will certainly chime in
Cheers
Jack
Jack
Image
DSTD 737 complet. Materiel FDS. Sim-Avionics P3DV4.
Avatar de l’utilisateur
Jackpilot
 
Messages: 1506
Inscription: 22/11/11

Re: Presentation BAT21

Messagede Bat21 » Dim 9 Fév 2014 19:58

Thank you for your message,

I have a Canadian aviation story
In the past, I worked for a pilot who had mounted an association of older aircraft. Once he had organized the return of an Avenger from canada. So an exceptional convoy started. On the road, removing panels and pylons to allow the passage of the precious load, they finally arrived at the port.
But the transportation beyond the Atlantic ocean never did. images/smilies/eusa_naughty.gif
In effect, vessel had broke one of its propellers. It was the French aircraft carrier the "Charles de Gaulle". And I assure you that this is a true story.

Maybe, I'll be making a presentation in french

goodbye
Avatar de l’utilisateur
Bat21
 
Messages: 3
Inscription: 30/01/14
Localisation: near Geneva, Franco-Suisse

Re: Presentation BAT21

Messagede Bat21 » Dim 9 Fév 2014 20:22

Bonjour à tous, je suis ingénieur hardware avec quinze ans d'expérience dans l'aéronautique d'essais, BA 217.
Je suis très intéressé pour monter une petite installation de simulation avec les instruments basiques (anémomètre, horizon, altimètre, cap) qui cependant restitue aussi les assiettes de tangage, et de roulis peu être (mais cela je m'en occupe).
Je suis un débutant avec FSX et j'ignore quelles cartes utiliser ? Auriez vous quelques pistes  à me proposer ?
par où commencer ? ou trouver les instruments factices ou modifiés ?
Vous pouvez compter sur mon aide pour des problèmes de scripts ou d'électronique.
A tous merci , images/smilies/844840.gif
Avatar de l’utilisateur
Bat21
 
Messages: 3
Inscription: 30/01/14
Localisation: near Geneva, Franco-Suisse

Re: Presentation BAT21

Messagede Boutondair » Dim 9 Fév 2014 21:04

Bonjour Bat21

bienvenueaffiche

David
Image Image
Petit je rêvais que je volerais, maintenant grâce au virtuel je vole !!!!!
Avatar de l’utilisateur
Boutondair
Administrateur du site
 
Messages: 4174
Inscription: 20/04/09
Localisation: Ballans (17) proche de Cognac

Re: Presentation BAT21

Messagede C6_Pat » Dim 9 Fév 2014 22:29

Hello bienvenueaffiche
" Tout arrive à l'homme qui sait attendre "
.....enfin pas trop longtemps quand même.....
Mon pit' P47 Razorback https://www.checksix-forums.com/viewtopic.php?f=286&t=156962
Avatar de l’utilisateur
C6_Pat
 
Messages: 834
Inscription: 20/12/11
Localisation: Devant l'nordinateur en Alsace

Re: Presentation BAT21

Messagede tabar57 » Mar 11 Fév 2014 10:30

Bonjour Bat21,

bienvenueaffiche sur ce forum, un ingénieur de plus c'est pas de refus

Cordialement

Bernard
Mon blog de construction : http://tabar57.blog4ever.com
Hémicockpit de Beechcraft B200 ( de FlightOne ) P3DV4.5 et 2 PC en réseau W7 64 bits et W10, cartes OC et FDbus, vibreur et yoke rdf de BFFsimulation, météo réelle asp4
Avatar de l’utilisateur
tabar57
 
Messages: 3651
Inscription: 29/12/10
Localisation: Dans ma cabine en Lorraine


Retourner vers Présentations des membres





Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 21 invités